Air cooled rectifiers from Littelfuse / IXYS
High power stacks air cooled rectifiers from Littelfuse combine and coordinate the operations of diodes, IGBTs, surge protective devices, and fuses. Each sealed and fan- or water-cooled semiconductor assembly contains at least two diodes and two insulated-gate bipolar transistors. Depending on their components and configurations, the power stacks can serve as single-phase, three-phase, or six-phase bridge rectifiers.
You can choose the types of overvoltage, overcurrent, and short-circuit protection you require. Schedule a speed date to discuss fully custom-built solutions.
Features
- Link voltage of 2.8 kV dc
- Current rating of 1.2 kArms
- UL Recognized
- RoHS compliant
Benefits
- Integrated snubber circuit
- Advanced optically fired gate trigger units
- Complete pressure contact construction
- Short inductance paths reduce inductance peaks
- Short paths between components reduce inductance peaks
- Preloaded clamping evenly distributes applied forces
A modular solution
A range of Westack & Westack Lite Assembly modules can either incorporate single or dual devices and allow the building of:
- Single phase diode and thyristor bridges
- Three phase diode and thyristor bridges
- Six phase diode and thyristor bridges
Together with littelfuse we can provide custom built assemblies. Cooling for each module section is provided by the use of a low noise 115/230 V ac fan which is protected against overloading by an integral thermal cut-out.
Surge suppression and fusing provides reliable and safe operation. Surge suppression (protecting the devices from voltage transients) and high speed fuses (protection against short-circuits) are available.
