Compact and modular design
The compact mechanical design supports the control concept of the DC breaker to work as a standalone solution. The power-modules are accessible from the front and the back side. The basic configuration is a modular built DC breaker with integrated sensor communication and control unit. The table shows the currently available current ratings and dimensions. Customized versions are available upon request.
Short-citcuit and overload protection
In case of an event, the breaker interrupts the current within microseconds. With the response time requirement, local fault protection must be performed autonomously by the control system without the need for external control or fault detection. The fast opening time of our solid- state breaker limits the fault current and reduces the negative impact on the load to a minimum. The current does not reach damaging energy levels and can be interrupted without forming an arc. In addition to the fast over-current protection, the breaker opens on a configurable time-current prole (l2t) for overload protection.
Product type approval from Lloyd’s Register
Our solid-state DC breakers have received the marine product type approval from Lloyd’s Register (LR). Product type approval is a critical step in the marine industry, particularly as electrical systems transition towards greener, more efficient technologies such as DC power distribution.
✓ Streamlined System Approvals
✓ Global Market Access
✓ Enhanced Reliability & Safety
✓ Support for DC Electrification
Learn more about the product type approval from Lloyd’s Register.